One Photonic Wafer Probe Station and one Photonic Assembly Station

Abierta

TED (EU)

Todas las licitaciones abiertas en Dinamarca

Danmarks Tekniske Universitet - DTU

Dinamarca

1 M €

2 nov 2026

Descripción

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility.  DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

El registro

Tal como se publicó. El texto del anuncio permanece con el editor.

Comprador

Danmarks Tekniske Universitet - DTU

País

Dinamarca

Regiones (NUTS)

Københavns omegn

Categoría

Equipo de laboratorio, óptico y de precisión (excepto gafas) · Laboratory, optical and precision equipment · Industrial machinery38540000, 38500000, 38636000, 42990000

Valor del contrato

1 M €

Plazo

2 nov 2026

Publicado

4 oct 2026

Idiomas

English

Fuente

TED (EU) · 681487-2026

Anuncio completo y documentos de licitaciónDocumentos de licitación

Cómo presentar oferta

Procedimiento

Procedimiento abierto - cualquier empresa puede presentar oferta

Presente su oferta en

https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B=

Idioma de presentación

ENG

Presentación electrónica

Obligatoria

Pliegos

De libre acceso

Criterios de adjudicación

Price, Machine (incl. physical requirements), Process, Installation, service and guarantee

Cómo se decide la adjudicación

The price to be evaluated is “Technical evaluation price”, specified in Appendix 2 – Prices. DTU uses a linear point scale model to evaluate the Tenderers’ prices. The linear model implies that the offered prices are converted into points. The offered prices are awarded points on a scale from 0-10. Thus, lowest price is awarded maximum points 10, while prices that are 100% or more expensive / higher than the lowest price are awarded 0 points. Other prices in between are awarded points according to the formula for linear interpolation., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 10, 11, 14, 15, 16 & 18) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (20, 22, 25, 28, 29, 30, 33, 35, 37, 38, 41, 43, 47, 48, 49, 50, 51, 52, 54, 55, 59, 60 & 61) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (65, 67 & 68) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 8, 10, 11, 14, 15, 16 & 17) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (21, 22, 24, 26, 27, 29, 30, 32, 34, 37, 40, 42, 44, 45 & 46) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (51, 53 & 55) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10.

Condiciones del contrato

Tipo de contrato

Suministros, Servicios

Lugar de ejecución

DK012

Duración

1 año

Su oferta debe mantenerse válida hasta

3 meses

Acuerdo marco

No

Sistema dinámico de adquisición

No

Ofertas variantes

No permitidas

Financiado por la UE

No

Contactar con el órgano de contratación

Correo electrónico

lplaa@dtu.dk

Teléfono

+45 99999999

Dirección

Anker Engelunds Vej 1, 2800, Kgs. Lyngby

Sitio web

https://www.dtu.dk

Punto de contacto

Laura Aagaard

¿Puede su empresa licitar a esto?

Pegue un sitio web. Leemos lo que hace la empresa y lo puntuamos frente a esta licitación. Sin cuenta.

¿Qué tamaño tiene este contrato?

La misma cifra medida dos veces, porque la respuesta cambia según dónde licite.

Frente a 6 contratos comparables abiertos en toda Europa

cuarto inferior

mitad central

cuarto superior

Frente a 1 contratos abiertos con el mismo código en Dinamarca

Hay muy pocos contratos comparables abiertos ahora mismo para situar este frente a ellos.

Más grande que tres de cada cuatro contratos comparables.

Licitaciones abiertas como esta

Ordenadas por lo que tratan los anuncios, no por palabras coincidentes en el título.

Los datos de los anuncios se reutilizan a partir de fuentes oficiales: Tenders Electronic Daily (TED), publicado por la Oficina de Publicaciones de la Unión Europea en virtud de la Decisión 2011/833/UE de la Comisión; oeffentlichevergabe.de y TenderNed, publicados bajo CC0. Cada anuncio enlaza con el original, que es la versión que prevalece.

Ver solo las que encajan con su empresa

Cada semana se publican licitaciones como esta. Con un perfil verá las que su empresa puede ganar, puntuadas y con una línea que explica cada coincidencia.

Empezar gratis