One Photonic Wafer Probe Station and one Photonic Assembly Station

Aperta

TED (EU)

Tutte le gare aperte in Danimarca

Danmarks Tekniske Universitet - DTU

Danimarca

1 Mln €

2 nov 2026

Descrizione

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility.  DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Il record

Come pubblicato. Il testo dell’avviso resta presso l’editore.

Committente

Danmarks Tekniske Universitet - DTU

Paese

Danimarca

Regioni (NUTS)

Københavns omegn

Categoria

Attrezzature da laboratorio, ottiche e di precisione (escluso vetri) · Laboratory, optical and precision equipment · Industrial machinery38540000, 38500000, 38636000, 42990000

Valore del contratto

1 Mln €

Scadenza

2 nov 2026

Pubblicato

4 ott 2026

Lingue

English

Fonte

TED (EU) · 681487-2026

Avviso completo e documenti di garaDocumenti di gara

Come presentare offerta

Procedura

Procedura aperta - qualsiasi operatore economico può presentare offerta

Presenti l’offerta su

https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B=

Lingua di presentazione

ENG

Presentazione elettronica

Obbligatoria

Documenti di gara

Liberamente disponibili

Criteri di aggiudicazione

Price, Machine (incl. physical requirements), Process, Installation, service and guarantee

Come viene decisa l’aggiudicazione

The price to be evaluated is “Technical evaluation price”, specified in Appendix 2 – Prices. DTU uses a linear point scale model to evaluate the Tenderers’ prices. The linear model implies that the offered prices are converted into points. The offered prices are awarded points on a scale from 0-10. Thus, lowest price is awarded maximum points 10, while prices that are 100% or more expensive / higher than the lowest price are awarded 0 points. Other prices in between are awarded points according to the formula for linear interpolation., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 10, 11, 14, 15, 16 & 18) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (20, 22, 25, 28, 29, 30, 33, 35, 37, 38, 41, 43, 47, 48, 49, 50, 51, 52, 54, 55, 59, 60 & 61) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (65, 67 & 68) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 8, 10, 11, 14, 15, 16 & 17) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (21, 22, 24, 26, 27, 29, 30, 32, 34, 37, 40, 42, 44, 45 & 46) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (51, 53 & 55) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10.

Condizioni contrattuali

Tipo di appalto

Forniture, Servizi

Luogo di esecuzione

DK012

Durata

1 anno

La Sua offerta deve restare valida per

3 mesi

Accordo quadro

No

Sistema dinamico di acquisizione

No

Offerte varianti

Non ammesse

Finanziato dall’UE

No

Contatti la stazione appaltante

E-mail

lplaa@dtu.dk

Telefono

+45 99999999

Indirizzo

Anker Engelunds Vej 1, 2800, Kgs. Lyngby

Sito web

https://www.dtu.dk

Punto di contatto

Laura Aagaard

La sua azienda può partecipare?

Incolli un sito web. Leggiamo cosa fa l’azienda e lo valutiamo rispetto a questa gara. Nessun account.

Quanto è grande questo contratto?

Lo stesso valore misurato due volte, perché la risposta cambia in base a dove si partecipa.

Rispetto a 6 contratti comparabili aperti in tutta Europa

quarto inferiore

metà centrale

quarto superiore

Rispetto a 1 contratti aperti con lo stesso codice in Danimarca

Ci sono troppo pochi contratti comparabili aperti ora per posizionare questo contratto.

Più grande di tre contratti comparabili su quattro.

Gare aperte come questa

Ordinate per ciò di cui parlano gli avvisi, non per parole uguali nel titolo.

I dati dei bandi sono riutilizzati da fonti ufficiali: Tenders Electronic Daily (TED), pubblicato dall’Ufficio delle pubblicazioni dell’Unione europea ai sensi della decisione 2011/833/UE della Commissione; oeffentlichevergabe.de e TenderNed, pubblicati con licenza CC0. Ogni bando rimanda all’originale, che è la versione che fa fede.

Veda solo quelle adatte alla Sua azienda

Bandi come questo escono ogni settimana. Con un profilo vedrà quelli che la sua azienda può vincere, con un punteggio e una riga che spiega ogni corrispondenza.

Inizia gratis