One Photonic Wafer Probe Station and one Photonic Assembly Station

Åpen

TED (EU)

Alle åpne anbud i Danmark

Danmarks Tekniske Universitet - DTU

Danmark

1 mill. €

2. nov. 2026

Beskrivelse

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility.  DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Oppføringen

Som publisert. Kunngjøringsteksten blir hos utgiveren.

Kjøper

Danmarks Tekniske Universitet - DTU

Land

Danmark

Regioner (NUTS)

Københavns omegn

Kategori

Laboratorieutstyr, optisk utstyr og presisjonsutstyr (unntatt briller) · Laboratory, optical and precision equipment · Industrial machinery38540000, 38500000, 38636000, 42990000

Kontraktsverdi

1 mill. €

Frist

2. nov. 2026

Publisert

4. okt. 2026

Språk

English

Kilde

TED (EU) · 681487-2026

Full kunngjøring og anbudsdokumenterAnbudsdokumenter

Slik gir du tilbud

Prosedyre

Åpen anbudskonkurranse - alle kan levere tilbud

Lever tilbudet ditt her

https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B=

Språk for innlevering

ENG

Elektronisk innlevering

Påkrevd

Konkurransegrunnlag

Fritt tilgjengelig

Tildelingskriterier

Price, Machine (incl. physical requirements), Process, Installation, service and guarantee

Hvordan tildelingen avgjøres

The price to be evaluated is “Technical evaluation price”, specified in Appendix 2 – Prices. DTU uses a linear point scale model to evaluate the Tenderers’ prices. The linear model implies that the offered prices are converted into points. The offered prices are awarded points on a scale from 0-10. Thus, lowest price is awarded maximum points 10, while prices that are 100% or more expensive / higher than the lowest price are awarded 0 points. Other prices in between are awarded points according to the formula for linear interpolation., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 10, 11, 14, 15, 16 & 18) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (20, 22, 25, 28, 29, 30, 33, 35, 37, 38, 41, 43, 47, 48, 49, 50, 51, 52, 54, 55, 59, 60 & 61) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (65, 67 & 68) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 8, 10, 11, 14, 15, 16 & 17) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (21, 22, 24, 26, 27, 29, 30, 32, 34, 37, 40, 42, 44, 45 & 46) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (51, 53 & 55) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10.

Kontraktsvilkår

Kontraktstype

Varer, Tjenester

Leveringssted

DK012

Varighet

1 år

Tilbudet ditt må være gyldig i

3 måneder

Rammeavtale

Nei

Dynamisk innkjøpsordning

Nei

Alternative tilbud

Ikke tillatt

EU-finansiert

Nei

Kontakt oppdragsgiveren

E-post

lplaa@dtu.dk

Telefon

+45 99999999

Adresse

Anker Engelunds Vej 1, 2800, Kgs. Lyngby

Nettsted

https://www.dtu.dk

Kontaktpunkt

Laura Aagaard

Kan firmaet ditt by på dette?

Lim inn et nettsted. Vi leser hva firmaet gjør og scorer det mot dette anbudet. Ingen konto.

Hvor stor er denne kontrakten?

Samme tall målt to ganger, fordi svaret avhenger av hvor du byr fra.

Mot 6 sammenlignbare kontrakter åpne i hele Europa

nedre kvartil

midtre halvdel

øvre kvartil

Mot 1 åpne kontrakter med samme kode i Danmark

For få sammenlignbare kontrakter er åpne akkurat nå til å plassere dette mot dem.

Større enn tre av fire sammenlignbare kontrakter.

Åpne anbud som dette

Rangert etter hva kunngjøringene handler om, ikke etter like ord i tittelen.

Kunngjøringsdataene er gjenbrukt fra offisielle kilder: Tenders Electronic Daily (TED), utgitt av Den europeiske unions publikasjonskontor i henhold til kommisjonsbeslutning 2011/833/EU; oeffentlichevergabe.de og TenderNed, publisert under CC0. Hver kunngjøring lenker til originalen, som er den versjonen som gjelder.

Se bare de som passer bedriften din

Kunngjøringer som denne kommer hver uke. Med en profil ser du dem bedriften din kan vinne, med poeng og én linje som forklarer hvert treff.

Start gratis