One Photonic Wafer Probe Station and one Photonic Assembly Station

Åben

TED (EU)

Alle åbne udbud i Danmark

Danmarks Tekniske Universitet - DTU

Danmark

1 mio. €

2. nov. 2026

Beskrivelse

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility.  DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Posten

Som offentliggjort. Bekendtgørelsesteksten bliver hos udgiveren.

Køber

Danmarks Tekniske Universitet - DTU

Land

Danmark

Regioner (NUTS)

Københavns omegn

Kategori

Laboratorieudstyr, optisk udstyr og præcisionsudstyr (ikke briller) · Laboratory, optical and precision equipment · Industrial machinery38540000, 38500000, 38636000, 42990000

Kontraktværdi

1 mio. €

Frist

2. nov. 2026

Offentliggjort

4. okt. 2026

Sprog

English

Kilde

TED (EU) · 681487-2026

Fuld bekendtgørelse og udbudsdokumenterUdbudsdokumenter

Sådan byder du

Udbudsform

Offentligt udbud - alle kan afgive tilbud

Afgiv dit tilbud på

https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B=

Sprog for tilbuddet

ENG

Elektronisk afgivelse

Påkrævet

Udbudsmateriale

Frit tilgængeligt

Tildelingskriterier

Price, Machine (incl. physical requirements), Process, Installation, service and guarantee

Sådan afgøres tildelingen

The price to be evaluated is “Technical evaluation price”, specified in Appendix 2 – Prices. DTU uses a linear point scale model to evaluate the Tenderers’ prices. The linear model implies that the offered prices are converted into points. The offered prices are awarded points on a scale from 0-10. Thus, lowest price is awarded maximum points 10, while prices that are 100% or more expensive / higher than the lowest price are awarded 0 points. Other prices in between are awarded points according to the formula for linear interpolation., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 10, 11, 14, 15, 16 & 18) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (20, 22, 25, 28, 29, 30, 33, 35, 37, 38, 41, 43, 47, 48, 49, 50, 51, 52, 54, 55, 59, 60 & 61) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (65, 67 & 68) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 8, 10, 11, 14, 15, 16 & 17) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (21, 22, 24, 26, 27, 29, 30, 32, 34, 37, 40, 42, 44, 45 & 46) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (51, 53 & 55) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10.

Kontraktvilkår

Kontrakttype

Varer, Tjenesteydelser

Udførelsessted

DK012

Varighed

1 år

Dit tilbud skal stå ved magt i

3 måneder

Rammeaftale

Nej

Dynamisk indkøbssystem

Nej

Alternative tilbud

Ikke tilladt

EU-finansieret

Nej

Kontakt ordregiveren

E-mail

lplaa@dtu.dk

Telefon

+45 99999999

Adresse

Anker Engelunds Vej 1, 2800, Kgs. Lyngby

Hjemmeside

https://www.dtu.dk

Kontaktperson

Laura Aagaard

Kan din virksomhed byde?

Indsæt et websted. Vi læser, hvad virksomheden gør, og scorer det mod dette udbud. Ingen konto.

Hvor stor er denne kontrakt?

Det samme tal måles to gange, fordi svaret afhænger af, hvorfra du byder.

Mod 6 sammenlignelige kontrakter åbne i hele Europa

nederste kvartil

midterste halvdel

øverste kvartil

Mod 1 åbne kontrakter med samme kode i Danmark

Der er for få sammenlignelige kontrakter åbne lige nu til at placere dette imod dem.

Større end tre ud af fire sammenlignelige kontrakter.

Åbne udbud som dette

Rangeret efter hvad bekendtgørelserne handler om, ikke efter matchende ord i titlen.

Bekendtgørelsesdata genbruges fra officielle kilder: Tenders Electronic Daily (TED), udgivet af Den Europæiske Unions Publikationskontor i henhold til Kommissionens afgørelse 2011/833/EU; oeffentlichevergabe.de og TenderNed, udgivet under CC0. Hver bekendtgørelse fører til originalen, og det er originalen, der gælder.

Se kun dem, der passer til din virksomhed

Udbud som dette offentliggøres hver uge. Med en profil ser du dem, din virksomhed kan vinde, med score og en linje, der forklarer hvert match.

Start gratis