One Photonic Wafer Probe Station and one Photonic Assembly Station

Open

TED (EU)

Alle open aanbestedingen in Denemarken

Danmarks Tekniske Universitet - DTU

Denemarken

€ 1 mln.

2 nov 2026

Omschrijving

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility.  DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Het dossier

Zoals gepubliceerd. De tekst van de aankondiging blijft bij de uitgever.

Aanbestedende dienst

Danmarks Tekniske Universitet - DTU

Land

Denemarken

Regio's (NUTS)

Københavns omegn

Categorie

Laboratoriuminstrumenten, optische en precisie-instrumenten (uitgezonderd brillen) · Laboratory, optical and precision equipment · Industrial machinery38540000, 38500000, 38636000, 42990000

Opdrachtwaarde

€ 1 mln.

Deadline

2 nov 2026

Gepubliceerd

4 okt 2026

Talen

English

Bron

TED (EU) · 681487-2026

Volledige aankondiging en aanbestedingsdocumentenAanbestedingsdocumenten

Zo schrijft u in

Procedure

Openbare procedure - iedereen mag inschrijven

Uw inschrijving indienen via

https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B=

Taal van de inschrijving

ENG

Elektronische inschrijving

Verplicht

Aanbestedingsstukken

Vrij beschikbaar

Gunningscriteria

Price, Machine (incl. physical requirements), Process, Installation, service and guarantee

Hoe de gunning wordt bepaald

The price to be evaluated is “Technical evaluation price”, specified in Appendix 2 – Prices. DTU uses a linear point scale model to evaluate the Tenderers’ prices. The linear model implies that the offered prices are converted into points. The offered prices are awarded points on a scale from 0-10. Thus, lowest price is awarded maximum points 10, while prices that are 100% or more expensive / higher than the lowest price are awarded 0 points. Other prices in between are awarded points according to the formula for linear interpolation., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 10, 11, 14, 15, 16 & 18) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (20, 22, 25, 28, 29, 30, 33, 35, 37, 38, 41, 43, 47, 48, 49, 50, 51, 52, 54, 55, 59, 60 & 61) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (65, 67 & 68) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 8, 10, 11, 14, 15, 16 & 17) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (21, 22, 24, 26, 27, 29, 30, 32, 34, 37, 40, 42, 44, 45 & 46) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (51, 53 & 55) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10.

Contractvoorwaarden

Soort opdracht

Leveringen, Diensten

Plaats van uitvoering

DK012

Looptijd

1 jaar

Uw inschrijving moet geldig blijven tot

3 maanden

Raamovereenkomst

Nee

Dynamisch aankoopsysteem

Nee

Varianten

Niet toegestaan

EU-gefinancierd

Nee

Contact met de aanbestedende dienst

E-mail

lplaa@dtu.dk

Telefoon

+45 99999999

Adres

Anker Engelunds Vej 1, 2800, Kgs. Lyngby

Website

https://www.dtu.dk

Contactpersoon

Laura Aagaard

Kan uw bedrijf hierop inschrijven?

Plak een website. Wij lezen wat het bedrijf doet en scoren het tegen deze aanbesteding. Geen account.

Hoe groot is deze opdracht?

Hetzelfde bedrag twee keer gemeten, omdat het antwoord afhangt van waar u vandaan inschrijft.

Vergeleken met 6 vergelijkbare opdrachten die in Europa openstaan

onderste kwart

middelste helft

bovenste kwart

Vergeleken met 1 open opdrachten met dezelfde code in Denemarken

Er zijn nu te weinig vergelijkbare opdrachten open om deze ertegen af te zetten.

Groter dan drie van de vier vergelijkbare opdrachten.

Open aanbestedingen zoals deze

Gerangschikt op waar de aankondigingen over gaan, niet op dezelfde woorden in de titel.

Aankondigingsgegevens zijn hergebruikt uit officiële bronnen: Tenders Electronic Daily (TED), uitgegeven door het Bureau voor publicaties van de Europese Unie op grond van Besluit 2011/833/EU van de Commissie; oeffentlichevergabe.de en TenderNed, gepubliceerd onder CC0. Elke aankondiging verwijst naar het origineel, en dat origineel is de versie die geldt.

Zie alleen de aanbestedingen die bij uw bedrijf passen

Aankondigingen als deze verschijnen elke week. Met een profiel ziet u de aanbestedingen die uw bedrijf kan winnen, met score en een regel die elke match uitlegt.

Gratis beginnen