One Photonic Wafer Probe Station and one Photonic Assembly Station

Öppen

TED (EU)

Alla öppna upphandlingar i Danmark

Danmarks Tekniske Universitet - DTU

Danmark

1 mn €

2 nov. 2026

Beskrivning

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility.  DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Posten

Så som publicerat. Annonstexten ligger kvar hos utgivaren.

Köpare

Danmarks Tekniske Universitet - DTU

Land

Danmark

Regioner (NUTS)

Københavns omegn

Kategori

Laboratorieutrustning, optisk utrustning och precisionsutrustning (exkl. glas) · Laboratory, optical and precision equipment · Industrial machinery38540000, 38500000, 38636000, 42990000

Kontraktsvärde

1 mn €

Sista dag

2 nov. 2026

Publicerad

4 okt. 2026

Språk

English

Källa

TED (EU) · 681487-2026

Fullständig annons och upphandlingsdokumentUpphandlingsdokument

Så lämnar du anbud

Förfarande

Öppet förfarande - vem som helst får lämna anbud

Lämna ditt anbud på

https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B=

Anbudsspråk

ENG

Elektronisk anbudsinlämning

Obligatorisk

Upphandlingsdokument

Fritt tillgängliga

Tilldelningskriterier

Price, Machine (incl. physical requirements), Process, Installation, service and guarantee

Så avgörs tilldelningen

The price to be evaluated is “Technical evaluation price”, specified in Appendix 2 – Prices. DTU uses a linear point scale model to evaluate the Tenderers’ prices. The linear model implies that the offered prices are converted into points. The offered prices are awarded points on a scale from 0-10. Thus, lowest price is awarded maximum points 10, while prices that are 100% or more expensive / higher than the lowest price are awarded 0 points. Other prices in between are awarded points according to the formula for linear interpolation., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 10, 11, 14, 15, 16 & 18) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (20, 22, 25, 28, 29, 30, 33, 35, 37, 38, 41, 43, 47, 48, 49, 50, 51, 52, 54, 55, 59, 60 & 61) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (65, 67 & 68) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 8, 10, 11, 14, 15, 16 & 17) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (21, 22, 24, 26, 27, 29, 30, 32, 34, 37, 40, 42, 44, 45 & 46) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (51, 53 & 55) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10.

Kontraktsvillkor

Typ av kontrakt

Varor, Tjänster

Utförandeplats

DK012

Löptid

1 år

Ditt anbud måste vara giltigt i

3 månader

Ramavtal

Nej

Dynamiskt inköpssystem

Nej

Alternativa anbud

Inte tillåtna

EU-finansierat

Nej

Kontakta köparen

E-post

lplaa@dtu.dk

Telefon

+45 99999999

Adress

Anker Engelunds Vej 1, 2800, Kgs. Lyngby

Webbplats

https://www.dtu.dk

Kontaktpunkt

Laura Aagaard

Kan ditt företag lämna anbud?

Klistra in en webbplats. Vi läser vad företaget gör och poängsätter det mot denna upphandling. Inget konto.

Hur stort är detta kontrakt?

Samma siffra mäts två gånger, eftersom svaret beror på varifrån du lämnar anbud.

Jämfört med 6 jämförbara kontrakt öppna i hela Europa

nedre kvartilen

mittersta halvan

övre kvartilen

Jämfört med 1 öppna kontrakt med samma kod i Danmark

För få jämförbara kontrakt är öppna just nu för att placera denna mot dem.

Större än tre av fyra jämförbara kontrakt.

Öppna upphandlingar som denna

Rangordnade efter vad annonserna handlar om, inte efter matchande ord i titeln.

Annonsdata återanvänds från officiella källor: Tenders Electronic Daily (TED), publicerad av Europeiska unionens publikationsbyrå enligt kommissionens beslut 2011/833/EU; oeffentlichevergabe.de och TenderNed, publicerade under CC0. Varje annons länkar till originalet, som är den version som gäller.

Se bara de som passar ditt företag

Upphandlingar som denna publiceras varje vecka. Med en profil ser du dem som ditt företag kan vinna, poängsatta och med en rad som förklarar varje träff.

Börja gratis