One Photonic Wafer Probe Station and one Photonic Assembly Station

Avatud

TED (EU)

Kõik avatud hanked riigis Taani

Danmarks Tekniske Universitet - DTU

Taani

1 mln €

2. nov 2026

Kirjeldus

This tender concerns DTU Nano's planned procurement of a Photonic Assembly Station and a Photonic Wafer Probe Station. The tender is split into to two lots – one for each of the two stations. Tenderers may choose to bid on one or both lots, which will be evaluated and awarded individually. The assembly station is for connecting fibre array units (FAUs) to an optical chip. The type of connection will be edge coupling using waveguides loops for alignment but if necessary, the alignment can also be performed either using the light source on the chip (if it exists) or by using an external light source and connecting two FAUs, one on each side of the chip. Thus, the main purpose of the machine is to do assembly and fiber attachment of photonic chips. The system shall support research, prototyping, process development, pilot manufacturing, and low-volume production activities within DTU Nano's advanced fabrication facility.  DTU has activities within Silicon Photonics (SiPh), Photonic Integrated Circuits (PICs), Optical transceivers, Laser modules, Photodetectors, Fiber-optic assemblies, Co-packaged optics and Quantum photonic devices which we want to support in the best possible way. DTU therefore intends to purchase a reconfigurable, flexible, versatile machine. The purpose of the photonic wafer probe station is to characterise the quality of photonic integrated circuits (PICs). It should be possible to characterise both optical and electrical performance. For the optical characterisation, the main coupling in/out technique will be through grating couplers, but the equipment should be possible to be configured also for edge coupling to component facets in a grove on the wafer. In this case, different holders and fibres may be needed. The electrical characteristics are to be characterised both in DC as well as RF up to 40GHz using probe and/or probe cards. The system shall support research, development, process qualification, and routine characterization activities within DTU Nano's advanced fabrication facility.

Kirje

Nagu avaldatud. Teate tekst jääb avaldajale.

Ostja

Danmarks Tekniske Universitet - DTU

Riik

Taani

Piirkonnad (NUTS)

Københavns omegn

Kategooria

Laboriseadmed, optika- ja täppisinstrumendid (v.a klaasid) · Laboratory, optical and precision equipment · Industrial machinery38540000, 38500000, 38636000, 42990000

Lepingu väärtus

1 mln €

Tähtaeg

2. nov 2026

Avaldatud

4. okt 2026

Keeled

English

Allikas

TED (EU) · 681487-2026

Täielik teade ja hankedokumendidHankedokumendid

Kuidas pakkumust esitada

Hankemenetlus

Avatud hankemenetlus - pakkumuse võib esitada igaüks

Esitage pakkumus siin

https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=461519&TID=200421875&B=

Pakkumuse keel

ENG

Elektrooniline esitamine

Kohustuslik

Hankedokumendid

Vabalt kättesaadavad

Hindamiskriteeriumid

Price, Machine (incl. physical requirements), Process, Installation, service and guarantee

Kuidas otsustatakse lepingu sõlmimine

The price to be evaluated is “Technical evaluation price”, specified in Appendix 2 – Prices. DTU uses a linear point scale model to evaluate the Tenderers’ prices. The linear model implies that the offered prices are converted into points. The offered prices are awarded points on a scale from 0-10. Thus, lowest price is awarded maximum points 10, while prices that are 100% or more expensive / higher than the lowest price are awarded 0 points. Other prices in between are awarded points according to the formula for linear interpolation., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 10, 11, 14, 15, 16 & 18) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (20, 22, 25, 28, 29, 30, 33, 35, 37, 38, 41, 43, 47, 48, 49, 50, 51, 52, 54, 55, 59, 60 & 61) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (65, 67 & 68) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (3, 8, 10, 11, 14, 15, 16 & 17) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (21, 22, 24, 26, 27, 29, 30, 32, 34, 37, 40, 42, 44, 45 & 46) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10., The qualitative criteria will be assessed based on the Evaluation Requirements (51, 53 & 55) described in the specifications in Appendix 1 – Requirement Specification. Based on the assessment of fulfilments, points are awarded on a scale of 0-10.

Lepingutingimused

Lepingu liik

Asjad, Teenused

Täitmise koht

DK012

Kestus

1 aasta

Teie pakkumus peab kehtima kuni

3 kuud

Raamleping

Ei

Dünaamiline hankesüsteem

Ei

Alternatiivsed pakkumused

Ei ole lubatud

ELi rahastusega

Ei

Võtke hankijaga ühendust

E-post

lplaa@dtu.dk

Telefon

+45 99999999

Aadress

Anker Engelunds Vej 1, 2800, Kgs. Lyngby

Veebisait

https://www.dtu.dk

Kontaktisik

Laura Aagaard

Kas teie ettevõte saab pakkuda?

Kleepige veebisait. Loeme, mida ettevõte teeb, ja hindame seda selle hanke suhtes. Kontot pole vaja.

Kui suur see leping on?

Sama arvu mõõdetakse kaks korda, sest vastus sõltub sellest, kust te pakkumise teete.

Võrreldes 6 sarnase avatud lepinguga üle Euroopa

alumine veerand

keskmine pool

ülemine veerand

Võrreldes 1 sama koodiga avatud lepinguga riigis Taani

Praegu on liiga vähe sarnaseid avatud lepinguid, et seda nende suhtes paigutada.

Suurem kui kolm neljast sarnasest lepingust.

Avatud hanked nagu see

Järjestatud selle järgi, millest teated räägivad, mitte pealkirja samade sõnade järgi.

Hanketeadete andmeid kasutatakse ametlikest allikatest: Tenders Electronic Daily (TED), mille avaldab Euroopa Liidu Väljaannete Talitus komisjoni otsuse 2011/833/EL alusel; oeffentlichevergabe.de ja TenderNed, mis on avaldatud CC0 all. Iga teade viib algallika juurde ja just see versioon on määrav.

Vaadake ainult neid, mis teie ettevõttega sobivad

Selliseid teateid avaldatakse iga nädal. Profiil toob esile need, mida teie ettevõte võib võita, koos hinde ja iga sobivust selgitava reaga.

Alustage tasuta